T70R Inspection Light
Rechargeable
700
LUMENS
USB
RECHARGEABLE
SPOT
FLOOD
T70R Inspection Light
The T70R Inspection Light is a versatile addition to any toolkit , it features an SMD LED that produces a powerful floodlight output of 700 lumens. Additionally, it has a separate 120-lumen spotlight LED for when you require a bright, directional beam.
Another great feature of this torch is the 2500mAh Li-ion battery, which can run for up to 10 hours depending on the function you select. So whether you need a strong light for a long period of time or a quick burst of brightness, this torch has got you covered.
The T70R Inspection Light also boasts a convenient swivelling base that lets you set the torch at an angle that works best for you. This feature is particularly handy for illuminating small spaces like cupboards, tents, and car engines. The magnetic back makes it easy to attach to a variety of metal surfaces, giving you even more flexibility. If that's not enough, two different-sized hanging hooks are folded neatly into the torch itself, so you can hang it up and free up your hands while you work.
Features:
Powerful floodlight output of 700 lumens
Separate 120-lumen spotlight LED for directional beam
2500mAh Li-ion battery with up to 10 hours of run time
Swivelling base for adjustable angle
Magnetic back for easy attachment to metal surfaces
Two different-sized hanging hooks for hands-free use
IP54 water resistant
IK08 impact rating
Supplied with USB C lead.
| Mode | Flood | Spot |
|---|---|---|
| Brightness | 700 lm | 120 lm |
| Run time | 6 hrs | 10 hrs |
| LED Power | 5W | 1W |
| LED Colour | 6500K | |
| Light source | SMD LED | |
| Battery | Rechargeable 3.7V 2500mAh Li-ion | |
| Charge time | 0 hrs | |
| Impact resistant | IK08 | |
| Water resistant | IP54 | |
| Weight | 318g | |
| Dimensions | 270 x 65 x 40mm | |
| Supplied with | 1M USB-C Charging Lead | |
IP RATINGSThe IP (Ingress Protection) code indicates how well a device is protected against water and dust. This is defined by the international standard EN 60529. |
|||
|---|---|---|---|
| First Digit Solids (intrusion protection) |
Second Digit Water (moisture protection) |
||
| 0 | (or X - see section below): No special protection. Not rated (or no rating supplied) for protection against ingress of this type. | 0 | (or X - see section below): No protection. |
| 1 | Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter. | 1 | Protection against vertically falling droplets, such as condensation. ensuring that no damage or interrupted functioning of components will be incurred when an item is upright. |
| 2 | Protection against fingers or other object not greater than 80mm in length and 12mm in diameter (accidental finger contact). | 2 | Protection against water droplets deflected up to 15° from vertical |
| 3 | Protection from entry by tools, wires etc, with a diameter of 2.5 mm or more. | 3 | Protected against spray up to 60° from vertical. |
| 4 | Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc). | 4 | Protected against water splashes from all directions. Tested for a minimum of 10 minutes with an oscillating spray (limited ingress permitted with no harmful effects). |
| 5 | Partial protection against dust that may harm equipment. | 5 | Protection against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects). |
| 6 | Totally dust tight. Full protection against dust and other particulates, including a vacuum seal, tested against continuous airflow. | 6 | Protection against direct high pressure jets. |
| 7 | Protection against full immersion for up to 30 minutes at depths between 15 cm and 1 metre (limited ingress permitted with no harmful effects). | ||
| 8 | Protection against extended immersion under higher pressure (i.e. greater depths). Precise parameters of this test will be set and advertised by the manufacturer and may include additional factors such as temperature fluctuations and flow rates, depending on equipment type. | ||
| 9K | Protection against high-pressure, high-temperature jet sprays, wash-downs or steam-cleaning procedures - this rating is most often seen in specific road vehicle applications (standard ISO 20653:2013 Road Vehicles - Degrees of protection). | ||
IK RATINGSIK ratings are defined as IK and a number from 00 to 10, this indicates the degree of protection provided by the electrical enclosures against external mechanical impacts. |
|
|---|---|
| What are the different IK ratings? | |
| IK00 | There is no Protection |
| IK01 | Protected against 0.14 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 56mm above) |
| IK02 | Protected against 0.2 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 80mm above) |
| IK03 | Protected against 0.35 joules of impact (this is the equivalent to the impact of a 0.2kg mass dropped from 140mm above) |
| IK04 | Protected against 0.5 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 200mm above the impacted surface) |
| IK05 | Protected against 0.7 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 280mm above the impacted surface) |
| IK06 | Protected against 1 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 400mm above the impacted surface) |
| IK07 | Protected against 2 joules of impact (the equivalent to the impact of a 0.5kg mass dropped from 400mm above the impacted surface) |
| IK08 | Protected against 5 joules of impact (the equivalent to the impact of a 1.7kg mass dropped from 300mm above the impacted surface) |
| IK09 | Protected against 10 joules of impact (the equivalent to the impact of a 5kg mass dropped from 200mm above the impacted surface) |
| IK10 | Protected against 20 joules of impact (the equivalent to the impact of a 5kg mass dropped from 400mm above the impacted surface) |