LED Sensor Headlight
Rechargeable
300
LUMENS
USB
RECHARGEABLE
HIGH
LOW
FLOOD
LED Sensor Headlight
A versatile rechargeable LED headlight with spot and floodlight functions that can provide a super bright beam of up to 480 lumens.
The on/off button will cycle between spot high, spot low and floodlight modes. Holding the button down allows the light to be dimmed to your desired output. The two LEDs can be used independently or together. An optional sensor operated mode can be activated by pressing the sensor button. This mode allows the light to be switched on or off by moving your hand directly in front of the light. A useful feature for gloved or dirty hands.
The headlight has an impressive run time of up to ten hours from its powerful internal 3.7V 1400mAh Li-ion battery that can be recharged and used time and time again. A low power indicator notifies you when the light needs recharging.
The light unit can be tilted and is fitted to a head strap that can be adjusted to fit most head sizes. A magnetic base allows the light to be attached to metal surfaces when detached from the headband. Waterproof to IPX4 standard and impact rated to 1M.
Ideal for use around the home and for many leisure activities including camping, sailing, hiking and cycling and perfect for use in emergencies such as power failures or when working on cars.
Supplied with USB charging cable.
| Mode | High | Low | Flood | Both |
|---|---|---|---|---|
| Brightness | 300 Lm | 90 Lm | 250 Lm | 480 Lm |
| Beam distance | 60M | 20M | 10M | 69M |
| Run time | 3h | 10h | 3.5h | 1.45h |
| Light source | Osram P8 LED | COB LED | ||
| Water resistant | IPX4 | |||
| Impact resistant | 1 metre | |||
| Batteries | 902554 1400mah 3.7V Li-ion Rechargeable | |||
| Charge time | 2-2.5 hours | |||
| Weight | 98g approx | |||
| Dimensions | 67 x 37 x 40mm exc. strap | |||
| Supplied with | USB charging cable | |||
Instruction Manual
Declaration of Conformity
CE Declaration of Conformity
UKCA Declaration of Conformity
The best headlight that I have ever used. Great lighting spread, dimmable and sensor feature plus magnetic base are great for working outside.
I have had many head torches in my time but this one is the best I have ever had. The wide beam illuminates a large area so really handy working in small areas and when used with the spot beam its gives a useful distance of illumination.Battery lasts well.\r\nUsed for nearly twelve months trouble free and may get another to keep in the van.
IP RATINGSThe IP (Ingress Protection) code indicates how well a device is protected against water and dust. This is defined by the international standard EN 60529. |
|||
|---|---|---|---|
| First Digit Solids (intrusion protection) |
Second Digit Water (moisture protection) |
||
| 0 | (or X - see section below): No special protection. Not rated (or no rating supplied) for protection against ingress of this type. | 0 | (or X - see section below): No protection. |
| 1 | Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter. | 1 | Protection against vertically falling droplets, such as condensation. ensuring that no damage or interrupted functioning of components will be incurred when an item is upright. |
| 2 | Protection against fingers or other object not greater than 80mm in length and 12mm in diameter (accidental finger contact). | 2 | Protection against water droplets deflected up to 15° from vertical |
| 3 | Protection from entry by tools, wires etc, with a diameter of 2.5 mm or more. | 3 | Protected against spray up to 60° from vertical. |
| 4 | Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc). | 4 | Protected against water splashes from all directions. Tested for a minimum of 10 minutes with an oscillating spray (limited ingress permitted with no harmful effects). |
| 5 | Partial protection against dust that may harm equipment. | 5 | Protection against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects). |
| 6 | Totally dust tight. Full protection against dust and other particulates, including a vacuum seal, tested against continuous airflow. | 6 | Protection against direct high pressure jets. |
| 7 | Protection against full immersion for up to 30 minutes at depths between 15 cm and 1 metre (limited ingress permitted with no harmful effects). | ||
| 8 | Protection against extended immersion under higher pressure (i.e. greater depths). Precise parameters of this test will be set and advertised by the manufacturer and may include additional factors such as temperature fluctuations and flow rates, depending on equipment type. | ||
| 9K | Protection against high-pressure, high-temperature jet sprays, wash-downs or steam-cleaning procedures - this rating is most often seen in specific road vehicle applications (standard ISO 20653:2013 Road Vehicles - Degrees of protection). | ||
IK RATINGSIK ratings are defined as IK and a number from 00 to 10, this indicates the degree of protection provided by the electrical enclosures against external mechanical impacts. |
|
|---|---|
| What are the different IK ratings? | |
| IK00 | There is no Protection |
| IK01 | Protected against 0.14 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 56mm above) |
| IK02 | Protected against 0.2 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 80mm above) |
| IK03 | Protected against 0.35 joules of impact (this is the equivalent to the impact of a 0.2kg mass dropped from 140mm above) |
| IK04 | Protected against 0.5 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 200mm above the impacted surface) |
| IK05 | Protected against 0.7 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 280mm above the impacted surface) |
| IK06 | Protected against 1 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 400mm above the impacted surface) |
| IK07 | Protected against 2 joules of impact (the equivalent to the impact of a 0.5kg mass dropped from 400mm above the impacted surface) |
| IK08 | Protected against 5 joules of impact (the equivalent to the impact of a 1.7kg mass dropped from 300mm above the impacted surface) |
| IK09 | Protected against 10 joules of impact (the equivalent to the impact of a 5kg mass dropped from 200mm above the impacted surface) |
| IK10 | Protected against 20 joules of impact (the equivalent to the impact of a 5kg mass dropped from 400mm above the impacted surface) |