Focus350 LED Torch
3 x AAA Batteries
350
LUMENS
HIGH
LOW
STROBE
FOCUS
DISCONTINUED
Focus350 LED Torch
This torch features a 350 lumen output LED with three operating modes of High, Low & Strobe. The focus control allows the light to be adjusted from a tight spot beam to a flood light to suit the job in hand. The torch has an impressive run time of up to ten hours.
The anodised aluminium body is lightweight and durable and the torch is water and dust proof to IP54 for use in all weather conditions.
This torch is small and lightweight but provides a powerful bright beam of light for up to 100 metres.
Supplied complete with three AAA cell alkaline batteries.
| Mode | High | Low |
|---|---|---|
| Brightness | 350 lumens | 100 lumens |
| Run time | 1.5 hours | 10 hours |
| Beam distance | 100 metres | |
| Light source | High-performance LED | |
| Water resistant | IP54 | |
| Impact resistant | 1 metre | |
| Weight | 102g (exc batteries) | |
| Dimensions | 120mm x 35/28mm | |
| Supplied with | 3 AAA cell alkaline batteries Wrist strap | |
TOTALLY AMAZED BY THIS TORCH, AS I THOUGHT THE TORCH THAT I HAD WAS QUITE BRIGHT BUT THIS ONE PROVED ME SO WRONG!
THREE SETTINGS, WATERPROOF, FITS NICELY IN YOUR POCKET AND VERY DURABLE SO ITS DEFINITELY MY BEST BUY THIS YEAR SO FAR, EXCELLENT
This torch was given to me as a present at Christmas. I have other compact CREE led torches which are bright. This one is of a much higher quality and brighter. The led provides a crisp white light without any stray ring of colour. The beam, flood and focus are absolutely excellent. The price of the torch is a littler more than cheaper torches but the quality and performance are far greater. I consider it well worth the cost. I like it so much I am going to buy another at my local stockist. A super torch!
What an outstanding torch!
I bought this to use as a cycle helmet mounted light for when I'm doing night time off-roading on Dartmoor. Fabulous spread of light to supplement my handlebar mounted light as it tracks your head movement, being helmet mounted (via a rubber mount I bought on eBay), so you can look around for any obstacles/changes in track.
It's been used in the freezing cold, pouring rain and sloppy mud and it's withstood the lot.
Battery life is good and it starts to get dimmer beyond an hour or so, depending on the temperature, but it doesn't just switch off. It doesn't get hot in use, either.
Highly recommended.
1 review awaiting approval
IP RATINGSThe IP (Ingress Protection) code indicates how well a device is protected against water and dust. This is defined by the international standard EN 60529. |
|||
|---|---|---|---|
| First Digit Solids (intrusion protection) |
Second Digit Water (moisture protection) |
||
| 0 | (or X - see section below): No special protection. Not rated (or no rating supplied) for protection against ingress of this type. | 0 | (or X - see section below): No protection. |
| 1 | Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter. | 1 | Protection against vertically falling droplets, such as condensation. ensuring that no damage or interrupted functioning of components will be incurred when an item is upright. |
| 2 | Protection against fingers or other object not greater than 80mm in length and 12mm in diameter (accidental finger contact). | 2 | Protection against water droplets deflected up to 15° from vertical |
| 3 | Protection from entry by tools, wires etc, with a diameter of 2.5 mm or more. | 3 | Protected against spray up to 60° from vertical. |
| 4 | Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc). | 4 | Protected against water splashes from all directions. Tested for a minimum of 10 minutes with an oscillating spray (limited ingress permitted with no harmful effects). |
| 5 | Partial protection against dust that may harm equipment. | 5 | Protection against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects). |
| 6 | Totally dust tight. Full protection against dust and other particulates, including a vacuum seal, tested against continuous airflow. | 6 | Protection against direct high pressure jets. |
| 7 | Protection against full immersion for up to 30 minutes at depths between 15 cm and 1 metre (limited ingress permitted with no harmful effects). | ||
| 8 | Protection against extended immersion under higher pressure (i.e. greater depths). Precise parameters of this test will be set and advertised by the manufacturer and may include additional factors such as temperature fluctuations and flow rates, depending on equipment type. | ||
| 9K | Protection against high-pressure, high-temperature jet sprays, wash-downs or steam-cleaning procedures - this rating is most often seen in specific road vehicle applications (standard ISO 20653:2013 Road Vehicles - Degrees of protection). | ||
IK RATINGSIK ratings are defined as IK and a number from 00 to 10, this indicates the degree of protection provided by the electrical enclosures against external mechanical impacts. |
|
|---|---|
| What are the different IK ratings? | |
| IK00 | There is no Protection |
| IK01 | Protected against 0.14 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 56mm above) |
| IK02 | Protected against 0.2 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 80mm above) |
| IK03 | Protected against 0.35 joules of impact (this is the equivalent to the impact of a 0.2kg mass dropped from 140mm above) |
| IK04 | Protected against 0.5 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 200mm above the impacted surface) |
| IK05 | Protected against 0.7 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 280mm above the impacted surface) |
| IK06 | Protected against 1 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 400mm above the impacted surface) |
| IK07 | Protected against 2 joules of impact (the equivalent to the impact of a 0.5kg mass dropped from 400mm above the impacted surface) |
| IK08 | Protected against 5 joules of impact (the equivalent to the impact of a 1.7kg mass dropped from 300mm above the impacted surface) |
| IK09 | Protected against 10 joules of impact (the equivalent to the impact of a 5kg mass dropped from 200mm above the impacted surface) |
| IK10 | Protected against 20 joules of impact (the equivalent to the impact of a 5kg mass dropped from 400mm above the impacted surface) |