Mini LED Headlight
Rechargeable
400
LUMENS
USB
RECHARGEABLE
HIGH
MEDIUM
LOW
RED FLASH
Mini LED Headlight
The Lighthouse Mini Rechargeable Headlight is a lightweight yet powerful lighting solution for all manner of outdoor activities. This headlight boasts 5 different light modes, including the usual high, medium and low settings, as well as an ultra-bright turbo mode that can be activated by holding the button for 2 seconds, and a red flashing mode that can be activated with a double click.
Designed with convenience and comfort in mind, the Lighthouse Mini features an adjustable head strap and a 180-degree tilting LED that can be moved in increments to provide a directed beam. For added functionality the unit can be removed from the strap and clipped on to a baseball cap for casual use. It can be charged using the USB Type C cable included, so you can easily recharge it on the go.
For added safety, the head strap is reflective, making you more visible in low-light conditions. With a battery life of up to 40 hours, you can rely on this headlight for constant light during your work day or outdoor adventures.
| Mode | High | Medium | Low | Turbo | Red Flashing |
|---|---|---|---|---|---|
| Brightness | 180 lm | 80 lm | 30 lm | 400 lm | |
| Run time | Up to 40 hrs | ||||
| Light source | LED | ||||
| Battery | 200mAh Li-Polymer | ||||
| Charge time | Approx 2 hours | ||||
| Water resistant | IP54 | ||||
| Weight | ??g | ||||
| Dimensions | 43.3 x 33.3 x 31.4mm | ||||
| Supplied with | USB-C charging cable | ||||
Instruction Manual
I recently purchased one of these head lights, and I have been very impressed with light. The materials used are second to none. I use mine for night fishing and it gets me through long sessions without having to worry about the need to recharge it.
These headlights are a game changer.
IP RATINGSThe IP (Ingress Protection) code indicates how well a device is protected against water and dust. This is defined by the international standard EN 60529. |
|||
|---|---|---|---|
| First Digit Solids (intrusion protection) |
Second Digit Water (moisture protection) |
||
| 0 | (or X - see section below): No special protection. Not rated (or no rating supplied) for protection against ingress of this type. | 0 | (or X - see section below): No protection. |
| 1 | Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter. | 1 | Protection against vertically falling droplets, such as condensation. ensuring that no damage or interrupted functioning of components will be incurred when an item is upright. |
| 2 | Protection against fingers or other object not greater than 80mm in length and 12mm in diameter (accidental finger contact). | 2 | Protection against water droplets deflected up to 15° from vertical |
| 3 | Protection from entry by tools, wires etc, with a diameter of 2.5 mm or more. | 3 | Protected against spray up to 60° from vertical. |
| 4 | Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc). | 4 | Protected against water splashes from all directions. Tested for a minimum of 10 minutes with an oscillating spray (limited ingress permitted with no harmful effects). |
| 5 | Partial protection against dust that may harm equipment. | 5 | Protection against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects). |
| 6 | Totally dust tight. Full protection against dust and other particulates, including a vacuum seal, tested against continuous airflow. | 6 | Protection against direct high pressure jets. |
| 7 | Protection against full immersion for up to 30 minutes at depths between 15 cm and 1 metre (limited ingress permitted with no harmful effects). | ||
| 8 | Protection against extended immersion under higher pressure (i.e. greater depths). Precise parameters of this test will be set and advertised by the manufacturer and may include additional factors such as temperature fluctuations and flow rates, depending on equipment type. | ||
| 9K | Protection against high-pressure, high-temperature jet sprays, wash-downs or steam-cleaning procedures - this rating is most often seen in specific road vehicle applications (standard ISO 20653:2013 Road Vehicles - Degrees of protection). | ||
IK RATINGSIK ratings are defined as IK and a number from 00 to 10, this indicates the degree of protection provided by the electrical enclosures against external mechanical impacts. |
|
|---|---|
| What are the different IK ratings? | |
| IK00 | There is no Protection |
| IK01 | Protected against 0.14 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 56mm above) |
| IK02 | Protected against 0.2 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 80mm above) |
| IK03 | Protected against 0.35 joules of impact (this is the equivalent to the impact of a 0.2kg mass dropped from 140mm above) |
| IK04 | Protected against 0.5 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 200mm above the impacted surface) |
| IK05 | Protected against 0.7 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 280mm above the impacted surface) |
| IK06 | Protected against 1 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 400mm above the impacted surface) |
| IK07 | Protected against 2 joules of impact (the equivalent to the impact of a 0.5kg mass dropped from 400mm above the impacted surface) |
| IK08 | Protected against 5 joules of impact (the equivalent to the impact of a 1.7kg mass dropped from 300mm above the impacted surface) |
| IK09 | Protected against 10 joules of impact (the equivalent to the impact of a 5kg mass dropped from 200mm above the impacted surface) |
| IK10 | Protected against 20 joules of impact (the equivalent to the impact of a 5kg mass dropped from 400mm above the impacted surface) |